If I didn't know better I'd think I was looking at a Martin. Very nice job!
| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| Scorched mahogany http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=5986 |
Page 1 of 1 |
| Author: | Joe Beaver [ Wed Apr 05, 2006 10:56 am ] |
| Post subject: | |
If I didn't know better I'd think I was looking at a Martin. Very nice job!
|
|
| Author: | Bobc [ Wed Apr 05, 2006 11:26 am ] |
| Post subject: | |
Terry it looks great to me. KTM-9 looks very good too. |
|
| Author: | Wayne Clark [ Wed Apr 05, 2006 11:30 am ] |
| Post subject: | |
Terry, That looks great! What did you use for the stain? Wayne |
|
| Author: | L. Presnall [ Wed Apr 05, 2006 1:40 pm ] |
| Post subject: | |
Looks great Terk! You couldn't have planned a finish better than that one...what a happy accident!  All my accidents are for keeps...I never get a good bounce golfing either tho, and so it goes!  Sweet job! I agree with Joe...looks like a fine Martin!
|
|
| Author: | old man [ Wed Apr 05, 2006 1:52 pm ] |
| Post subject: | |
Very nice!! 
Ron |
|
| Author: | peterm [ Wed Apr 05, 2006 1:54 pm ] |
| Post subject: | |
Scorching?? whre is it?
great job! me too....i thought it was a MArtin!
|
|
| Author: | Serge Poirier [ Wed Apr 05, 2006 2:47 pm ] |
| Post subject: | |
Scorching hot you mean Terry, this guitar is sizzling with refinement! Way to go on a repair well done also! Serge |
|
| Author: | Wayne Clark [ Wed Apr 05, 2006 3:20 pm ] |
| Post subject: | |
Terry, I like the KTM-9 as well. You really can't beat the ease of use. I may try a nitro finish sometime, but would have to sub it out too. When you used the colortone stain, did you apply it directly to the wood, or did you mix it into the finish? |
|
| Author: | Mark Tripp [ Wed Apr 05, 2006 11:47 pm ] |
| Post subject: | |
Terry: That is one fine looking dread! The talent shown on the OLF is just unbelievable! -Mark |
|
| Author: | KevinA [ Thu Apr 06, 2006 12:38 am ] |
| Post subject: | |
Terry, I can see why most people don't realize there was ever a problem. Great job! Kevin |
|
| Author: | LanceK [ Thu Apr 06, 2006 12:51 am ] |
| Post subject: | |
Smokin!!
|
|
| Author: | L. Presnall [ Thu Apr 06, 2006 2:26 am ] |
| Post subject: | |
No Lance, SCORCHIN'!! 
|
|
| Author: | Alain Desforges [ Thu Apr 06, 2006 2:39 am ] |
| Post subject: | |
Looks awesome Terry. That KTM finish came out really well... Beautiful figure on that top too... I also enjoyed your KTM vs. Nitro comparison. Very interesting... |
|
| Author: | Wayne Clark [ Thu Apr 06, 2006 12:11 pm ] |
| Post subject: | |
Terry, You mentioned that the finish on the neck was z-poxy. How does the finish feel compared to other finishes? I used the system 3 diluted in half on my first guitar and really liked the way the grain looked. I put KTM-9 on top of it, but did wonder if the expoxy would have been enough. |
|
| Author: | Cocephus [ Thu Apr 06, 2006 12:23 pm ] |
| Post subject: | |
What scorch? 
|
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|